Enables BMW DVD in motion for CIC with ncs expert BMW owners, normally you could play a video only while the car is parked or at a very low speed. Pcsx2 memory card. To unlock the TV or the DVD video while driving, you need do some coding job.
2007 - 2009 Lexus ES350 Video In Motion Lockout Bypass Nav, DVD in Motion. Please Call for Availability. Call For Price: 866-628-0677. 2007 - 2009 Lexus GS (S190) GS 350 / GS 430 / GS 450h Video In Motion Bypass NAV, DVD in Motion. BMW CIC Navigation: The BMW CIC unit has more capability and functionality than the CCC version. It allows for the DVD in motion coding feature because of its higher processing power, but is more difficult to update maps. To update maps one needs to obtain an FSC code and update the units Hard drive based storage. May 01, 2020 The Actual Coding. Ok so for enabling Video in Motion on a BMW F10 you need to: Enter E-sys. Connect to your car chassis (select F10 simple not F10 DIRECT, never use the Direct option) Read FARight click FA (click activate) Click Read SVT and the list of modules will be read and shown. Right click on the HUCIC or HUNBT module and click 'Read.
Bmw Dvd In Motion
This post will show you How to BMW DVD in Motion activation for CIC of BMW car
.For more cases about BMW , please visit here: BMW Trouble Repair.
1.You need to use NCS-Experttentool software, select File-FSW PSW MAN-OK.
(This is a BMW X5 E70 car, you need to use BMW ICOM Next to connect to the car)
2.Select CHASSIS-E70;
Bmw F10 Dvd In Motion Unlock
3.Select F1 (VIN/ZCS/FA)-F3(ZCS/FA)
4.Now you can read 17 car VIN numbers,Select F6 back;
5.Select F6 to read the vehicle information, then select F4,
6.Select CIC, click OK, continue；
7.Select F4 Process ECU, the software will pop up the hexadecimal number window, just close it (you can back up the BMW CIC configuration file FSW PSW.TRC at this time), and then open the FSW PSW.TRC file to modify the value and modify the bit picture After the modification is completed, save the modified file and replace the FSW PSW.TRC original file.
8.Switch to the NCS Expert software window, check whether the file and ECU are correct
9.Find C:/NCSPER /DATAEN /E70 (or C:/EC-APPS/NCSPER /DATAEN /E70), select the CIC.C1A file and modify it (you can back up the CIC.C1A file), and change the number 03 after 0636 to FF, save and replace the original CIC.C1A file（File-procedure cxx）。
10.Switch to the NCS Expert software window, select F5 Bassic funtions, select F2 job-SG_CODING-OK, select F3F3 Execule job, and finish.